How many pickets and posts for 200 feet of fence?
200 feet of 6 ft privacy fence with posts 8 ft apart takes 29 posts, 83 rails, and 471 pickets with 10 percent waste, in 25 sections. Setting the posts takes 58 bags of 50 lb concrete, and hanging the pickets takes about 2,600 screws. With posts at 6 ft you need 37 posts and 109 rails.
Lumber for 200 feet of fence
| Post spacing | Rails per section | Posts | Rails | Pickets (10% waste) | Concrete bags |
|---|---|---|---|---|---|
| 8 ft | 3 | 29 | 83 | 471 | 58 |
| 8 ft | 2 | 29 | 56 | 471 | 58 |
| 6 ft | 3 | 37 | 109 | 471 | 74 |
| 6 ft | 2 | 37 | 73 | 471 | 74 |
For a 6 ft privacy fence with 5-1/2 in pickets butted tight, 4 corners, and one 4 ft gate, with two 50 lb bags of concrete per post. Three rails are standard for 6 ft fences; two is common for 4 ft fences.
Change the numbers
The calculator below is preset for this size. Adjust anything and the results update instantly.
Shopping list for 200 feet of privacy fence
- Posts: 29 pressure-treated 4 × 4 × 8 ft, set 2 ft deep (below frost line in cold climates, which may mean 10 ft posts).
- Rails: 83 pressure-treated 2 × 4 × 8 ft, three per section.
- Pickets: 471 dog-ear pickets, 5/8 × 5-1/2 × 6 ft, cedar or pressure-treated pine.
- Concrete: 58 bags of 50 lb fast-setting mix, two per post. The concrete calculator handles odd post sizes.
- Fasteners: about 2,600 exterior screws or ring-shank nails for pickets, plus 332 3 in screws or rail brackets for the rails.
- Gate: one 4 ft gate kit with hinges and latch, and a 6 × 6 or doubled 4 × 4 on the hinge side.
- Gravel: 7 bags of gravel for drainage at the bottom of each post hole.
What 200 feet of fence costs
Materials for 200 feet of pressure-treated privacy fence run about $2,230 to $3,476: pickets at $2.50 to $4 each, 4 × 4 posts at $12 to $18, rails at $5 to $8, and concrete at $5 to $7 a bag. Cedar pickets add roughly 50 percent to the picket line. Pre-built 8 ft panels cost $60 to $120 each, or $1,500 to $3,000 for 25 sections, and go up faster but cannot follow slopes as well. A fence contractor typically charges $25 to $45 per linear foot installed for wood privacy fence, so $5,000 to $9,000 for this run. Renting a gas auger for the 29 post holes is about $75 to $100 a day.
Common questions
How many fence pickets do I need for 200 feet?
471 pickets of 5-1/2 in width butted tight, including 10 percent for waste and a gate. With a 1/2 in gap between pickets it drops to 432.
How many fence posts for 200 feet?
29 posts at 8 ft spacing or 37 at 6 ft, counting the corners and gate posts. Posts on 6 ft centers make a stiffer fence in windy areas and let you use 12 ft rails cut in half.
How much does 200 feet of privacy fence cost?
About $2,230 to $3,476 in materials for pressure-treated pine, or $5,000 to $9,000 installed by a contractor. Vinyl runs $30 to $60 per foot installed; chain link about $15 to $30.