How much drywall do I need for a 14×16 room?
A 14 × 16 ft room with 8 ft ceilings has 653 square feet to cover, walls and ceiling, after one door and two windows. That is 23 sheets of 4 × 8 drywall with 10 percent waste, or 15 sheets of 4 × 12. Finishing it takes about 35 lb of joint compound (1 buckets), 1 roll of tape, and 736 screws.
Drywall sheets for a 14×16 room
| Sheet size | Walls and ceiling | Walls only |
|---|---|---|
| 4 × 8 ft | 23 sheets | 15 sheets |
| 4 × 10 ft | 18 sheets | 12 sheets |
| 4 × 12 ft | 15 sheets | 10 sheets |
Counts include 10 percent waste, with one door and two windows deducted. The room has 429 square feet of wall and 224 square feet of ceiling.
Change the numbers
The calculator below is preset for this size. Adjust anything and the results update instantly.
Mud, tape, and screws for a 14×16 room
- Joint compound: about 35 lb for three coats, which is 1 bucket of 4.5 gallon all-purpose. Use setting-type (hot) mud for the first coat if you are in a hurry.
- Tape: 1 roll of 500 ft paper tape, or the same in mesh for flat seams. Paper is stronger on inside corners.
- Screws: 736 coarse-thread 1-1/4 in drywall screws, about 2.5 lb. Buy a 5 lb box.
- Corner bead: one 8 ft piece per outside corner, usually none in a plain rectangular room.
- Primer: new drywall drinks paint; one coat of PVA primer is 2 gallons. Then see the paint calculator.
Which sheet size for a 14×16 room
Standard 4 × 8 sheets are easiest to carry and fit through doors: 23 of them for this room. Hung horizontally, a 4 × 12 sheet spans a 12 ft wall in one piece with no butt joints, which is why pros prefer them; this room would take 15 sheets of 4 × 12. Use 1/2 in on walls and 5/8 in or 1/2 in sag-resistant on the ceiling if joists are 24 in apart. At $12 to $18 per 4 × 8 sheet, the drywall for this room is about $276 to $414; a drywall crew to hang and finish it typically charges $980 to $1,959, or $1.50 to $3 per square foot. Insulating the walls first? See the insulation calculator.
Common questions
How many sheets of drywall for a 14x16 room?
23 sheets of 4 × 8 for walls and ceiling, or 15 for the walls alone, including 10 percent waste. In 4 × 12 sheets it is 15 and 10.
How much joint compound for a 14x16 room?
About 35 lb, or 1 bucket of 4.5 gallon all-purpose compound, for taping and three coats over 653 square feet. A 5 gallon bucket covers roughly 400 to 500 square feet.
How many drywall screws for a 14x16 room?
About 736 screws at 32 per sheet, roughly 2.5 lb of 1-1/4 in coarse-thread screws. One 5 lb box is plenty.